Basic Modelling Techniques in 3ds Max

Follow by Email
Facebook
Facebook
Google+
Google+
http://graphic-world.co/3dgwg/post/basic-modelling-techniques-in-3ds-max/
RSS
Youtube
Youtube
Pinterest
Pinterest
LinkedIn
INSTAGRAM
SHARE
Basic Modelling Techniques in 3ds Max
526_tid_41.jpg
Here I will show you some of the basic concepts that many students of Max might overlook because they are focused on modelling characters right off the bat. While this is fine, it also makes for a frustrating experience when someone new to Max wishes to unleash their creativity.Therefore this is my main focus here, to help you understand some of the basic things you should have under your belt concerning using this programme in order to free the artist within you!What we are going to start with is learning how to use our Primitives to enable us to quickly get modelling. This is a powerful way to not only create or model quickly, but it can also be a great way of getting some ideas down in 3D space. Remember the point here is to unleash your creativity!The first thing that we must have in our minds is what we are going to model. However, sometimes just letting yourself go is a great way to explore your own creativity. But for this project I am going to begin thinking that we are going to try and model some kind of reactor. This is where I will start, but if we end up somewhere else, it’ll be okay because if our creativity begins leading us down a different path it is best to follow it. Of course, if you are being paid to model something specific then veering off that path will not end well for you. But with this exercise – which is exactly what this is going to be: an exercise – we will not have those constraints.Let’s begin!

1. Open Max, and under the Create tab change the Standard Primitives drop down to Extended Primitives, and then create a Chamfer Cylinder in the centre of the Perspective view. Remember that most of the Extended Primitives have 3 creation parameters that must be created: Radius, Height and Fillet. Here is what it should look with all three parameters created (Fig.01).

526_tid_01.jpg

Fig. 01

This is the only object we will create.  Everything else we do from here on out will be copies of this object.  We are also not going to convert it to an Editable Poly because, while it will give us control over the object at the sub-object level, we will lose the power to adjust and manipulate the Chamfer Cylinder primitive.  This is important and much overlooked.Â
Just

so we are all on the same page, select this cylinder, go to the Modify tab and make the following settings, shown in Fig.02.

526_tid_02.jpg

Fig. 02

2. Alright, now using the Move tool, hold down Shift with the LMB (left mouse button) and move the cylinder up on the Z axis a little, then release the mouse. In the window that opens ensure that Copy is the selected method and hit OK (Fig.03).

526_tid_03.jpg

Fig. 03

Note: from this point on, I am not going to describe in detail how to make these copies, I will assume that you now understand how to do it!

3. Now let’s adjust this new cylinder’s primitive properties, so go to the Modify tab, make these changes and then move the cylinder dow, like so (Fig.04).

526_tid_04.jpg

Fig. 04
4. Make another copy and move it up (Fig.05).

526_tid_05.jpg

Fig. 05

5. Copy it, switch to the Front View and then move it down and make these adjustments (Fig.06).

526_tid_06.jpg

Fig. 06

Comments

comments

Follow by Email
Facebook
Facebook
Google+
Google+
http://graphic-world.co/3dgwg/post/basic-modelling-techniques-in-3ds-max/
RSS
Youtube
Youtube
Pinterest
Pinterest
LinkedIn
INSTAGRAM
SHARE